lap joint

英 [læp dʒɔɪnt]

美 [læp dʒɔɪnt]

（互）搭接（头）；叠接；搭接接头；搭接缝; 搭接接头；搭接焊缝

计算机化学

英英释义

noun

• joint made by overlapping two ends and joining them together
  Synonym:splice

双语例句

• Influence of Elastic Modulus of Adhesive on the Stress and Strain Distribution in Aluminium Single Lap Joint
  胶粘剂弹性模量对铝合金单搭接接头应力应变分布的影响
• The shear strength and elongation of the lap joint increase with the increase of strain rate.
  焊点的剪切强度及伸长量随应变速率的增加而增加。
• Effect of Environmental Temperature on Strain in Adhesive Layer of Single Lap Joint
  单搭接接头胶层中的温度应变研究
• A design conception on probabilistic statistics was introduced into adhesively bonded single lap joint, and finite element method was applied to analyze the factors which have important influences on the mechanical property of adhesive joint. Using 100 samples the failure probability was concluded.
  将概率统计的设计观念引入单搭接粘接接头，通过有限元分析方法分析了对粘接接头力学性能影响较大的因素，并在抽样100次的情况下，分析了单搭接粘接接头失效的概率。
• The elasto-plastic finite element method ( FEM) was used to investigate the effect of the elastic modulus of adhesive on the stress and strain distribution in adhesively bonded aluminium single lap joint.
  利用弹塑性有限元法研究胶粘剂的弹性模量对单搭接接头应力应变分布的影响。
• Using boundary element method, the interfacial streeses of adhensive lap joint with either perfect or imperfect interface are studied.
  采用边界元法计算分析了具有理想界面和非理想界面的双板条胶合搭接连接的界面应力。
• Temperature and Thermal Stress Distribution in Single Lap Joint
  单搭接接头温度场与热应力分布的研究
• Stress Analyses of Double Lap Joint by Boundary Element Method
  双搭接接头应力场的边界元分析
• The lap joint produces bending effect under the action of tensile load and the bending degree decreases with the increase of yield limit of base material.
  搭接接头在拉伸载荷作用下会产生折弯效应，折弯程度随被钎焊母材屈服极限的增加而减小。
• We can obtain the good appearance and defect-free brass and aluminum alloy lap joint when selecting the appropriate parameters.
  焊接时选取合适的工艺参数，可以获得外观形貌良好且无缺陷的异种材料焊接接头。